AI Smart Parking

The design of a Smart Parking system requires the ability to estimate the number of free parking spaces and the number of occupied spaces in a car park, whether it is on the street (as is the case of a city centre for example) or within a perimeter, i.e. delimited by an entrance and an exit gate.

A.I. Tech is able to satisfy the various requirements for counting and monitoring parking spaces. With AI-Road3D it is possible to count the number of vehicles at the gates, and with AI-LPR it is possible to estimate not only the number of vehicles but also the average time they spend in the car parks. Finally, with AI-PARKING we can monitor the specific parking space, and determine whether it is free or occupied.

A special feature of this solution is that it can be used on multiple hardware platforms: edge side (on cameras), server side, or on the AI Appliance platform. Their integrability is practically unlimited thanks to the support of most of the communication protocols used today, such as Modbus/TCP, FTP and HTTP.

AI-Parking

AI-PARKING is the video analytics app that can automatically detect the occupancy status of a parking spot, identifying whether it is free or occupied. Thanks to the use of advanced algorithms based on deep neural networks, AI-PARKING-DEEP can be used both in indoor and outdoor environments and only requires the vehicle to be partially visible inside the parking space.

AI-PARKING is the ultimate solution for monitoring car parks, whether they are bordered (i.e. with entry and exit gates, such as in private, supermarket or airport car parks) or on-street (e.g. in city centres).

In both cases the app, combined with the AI-DASH-PRO dashboard, also provides useful statistical information in parking management, such as the average occupancy time of a parking space, the occupancy status of a single space, an area (i.e. a cluster of parking spaces) or an entire car park.

AI-PARKING is a multi-platform application, and can be installed on more than 20 different hardware platforms including cameras (edge), small processing systems (embedded devices), workstations and servers.

Edge

Embedded

Server

If you have chosen to use a workstation or server-based solution, please connect to our system design support portal: AI-DESIGNER.

AI-Parking allows you to send the status of parking spaces to external systems through the support of 20 notification protocols, including third-party VMS, standard protocols (such as HTTP, FTP, MODBUS and MQTT) and A.I. Tech proprietary protocols, which allow the notification of events to the A.I. Tech dashboards. You can get more details on the notification mechanisms available at the following link.

Thanks to the Smart Parking function offered by AI-DashPRO you can keep and make the most of all the information collected through the AI-Parking application.

Installation constraints

Video tutorial

Online help

Flyer

AI-LPR

AI-LPR-DEEP is a video analytics app that utilises an advanced artificial intelligence algorithm to perform licence plate detection and recognition. Thanks to the use of an innovative engine based on semantic technologies, it also enables automatic correction of license plates based on the specific nationality of the plate (*).

The solution can detect vehicles up to a maximum speed of 230 km/h (depending on the chosen hardware platform) and can be used both indoors (e.g. for monitoring car parks) and outdoors (e.g. for monitoring city streets).

* Countries for which the semantic engine is currently available: Italy.

AI-LPR-DEEP is a video analytics solution designed to meet the demands of licence plate reading. The application has various usage scenarios. The first is in car park management, as it is a fundamental tool for managing black and white lists, or even simply for associating number plates with parking tickets. AI-LPR-DEEP can also be a valid support in logistics, detecting the number plates of the various vehicles entering a port, a factory or a landfill site. At the same time, the application is also very useful in city scenarios. In fact, thanks to its ability to detect number plates at speeds of up to 230 km/h, it can be used to detect access to restricted traffic areas or access to reserved lanes.

AI-LPR is a multi-platform application, and can be installed on more than 20 different hardware platforms including cameras (edge), small processing systems (embedded devices), workstations and servers.

Edge

Embedded

Server

If you have chosen to use a workstation or server-based solution, please connect to our system design support portal: AI-DESIGNER.

AI-LPR allows license plates to be sent via over 20 communication protocols, including third-party VMS, standard protocols (such as HTTP, FTP, MODBUS and MQTT) and A.I. Tech proprietary protocols, which allow the notification of events to the A.I. Tech dashboards. You can get more details on the notification mechanisms available at the following link.

Installation constraints

Video tutorial

Online help

Flyer

AI-Road3D

AI-ROAD3D is a video analytics app that allows counting and classification of vehicles passing by a virtual sensor in a given direction. Three vehicle classes are considered: motorbikes, cars and trucks. The app also identifies the colour and average speed of each vehicle, and generates an alarm if this speed exceeds a certain threshold chosen by the operator. It is also able to assess traffic volume in real time. AI-ROAD3D combines an advanced 3D calibration and reconstruction mechanism of the scene with the most advanced artificial vision and artificial intelligence algorithms.

The application is available in two versions: AI-ROAD3D uses the latest deep learning algorithms to classify moving objects; whereas AI-ROAD3D-DEEP uses these algorithms for both object detection and classification, guaranteeing high accuracy even in extremely complex scenarios, such as in tunnels or crowded city streets, at night or in severe weather conditions.

AI-ROAD3D makes it possible to meet the needs of any city that would like to be defined as ‘smart’. It provides the possibility of understanding and analysing vehicle flows in the various city arteries by counting the various categories of vehicles. Analysing the average speed of vehicles on the various routes allows the identification of roads crossed with a higher average speed (possibly higher than a set threshold), thus suggesting an optimal position for positioning surveillance patrols or automatic systems that can be used for sanctioning purposes.

AI-ROAD3D can also be used to monitor tunnels or motorways.

Finally, in combination with the AI-DASH-PRO dashboard, the app can be used to monitor car parks by counting vehicles at the gates.

AI-ROAD-3D is a multi-platform application, and can be installed on more than 20 different hardware platforms including cameras (edge), small processing systems (embedded devices), workstations and servers.

Edge

Embedded

Server

If you have chosen to use a workstation or server-based solution, please connect to our system design support portal: AI-DESIGNER.

AI-Road3D allows you to send information on vehicles that have passed through an area under analysis, in particular:

Vehicle type
Color
Average speed

It also allows you to send an alarm if the estimated average speed of a vehicle exceeds a configurable threshold.

AI-Road3D supports over 20 notification protocols, including third-party VMS, standard protocols (such as HTTP, FTP, MODBUS and MQTT) and A.I. Tech proprietary protocols, which allow the notification of events to the A.I. Tech dashboards. You can get more details on the notification mechanisms available at the following link.

AI-Road3D allows you to send alarms to over 10 VMS, where you do not have a VMS you can use AI-DASH-PRO thanks to the integrated alarm management functionality.

Installation constraints

Video tutorial

Online help

Flyer